Install TeamForge, Database, SCM and EventQ on separate servers

Four-server distributed setup with TeamForge, Database (including Datamart), SCM (Subversion CVS and Git) and EventQ on RHEL/CentOS 7.3 servers.

Before you begin:

Remember:

  • TeamForge 17.8 supports both RHEL/CentOS 6.9 and 7.3. See TeamForge installation requirements
  • For the ETL service to run as expected in a distributed TeamForge installation, all servers must have the same time zone.
  • While you can run both EventQ and TeamForge on the same server, CollabNet recommends such an approach only for testing purposes. It's always recommended to run EventQ on a separate server for optimal scalability. See EventQ installation requirements.
  • Installing or upgrading TeamForge needs root privileges. You must log on as root or use a root shell to install or upgrade TeamForge.
The following table shows the distribution of services on different servers.
App Server: server-01 SCM and Git Integration Server: server-03
TeamForge Application Server (ctfcore) SCM Integration Server (subversion and cvs)
ETL Server (etl) Git Integration Server (gerrit and gerrit-database)
Search Server (search)  
Codesearch Server (codesearch)  
Mail Server (mail)  
Database Server: server-03 EventQ Server: server-02
Database Server (ctfcore-database and ctfcore-datamart) TeamForge EventQ Server (eventq, mongodb, redis and rabbitmq)

Do this on the TeamForge Application Server (server-01)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. If the TeamForge server has SELinux enabled, run it in 'permissive' mode temporarily while installing or upgrading TeamForge.

    If you have SELinux in "enforcing" mode, you must either disable SELinux or switch to "permissive" mode (recommended) before running the teamforge provision command. TeamForge create runtime fails otherwise.

    1. Verify if SELinux is running in enforcing mode.
      • getenforce
    2. If the output of the getenforce command is "permissive", continue with the next step. If not, run the following command to bring it to 'permissive' mode.
      • setenforce 0
  4. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8.xx-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.3 64 bit RPM package: CTF-Disconnected-media-17.8.655-104.rhel7.x86_64.rpm
        Note: In addition to the above CentOS 7.3 64 bit RPM package, you must get the following CentOS 7.3 compatibility RPM, which is required for TeamForge 17.8 disconnected media installation on CentOS 7.3 profile: compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm.
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm package if you are installing TeamForge 17.8 on CentOS 7.3.
      • rpm -ivh compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm
    4. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
      Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
      name=RHEL CDRom 			
      baseurl=file:///media/cdrom/Server/
      gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
      enabled=1
      gpgcheck=0
    6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  5. Install the following application packages.
    1. TeamForge: To install the TeamForge application packages run the following command:
      • yum install teamforge

Do this on the Database Server (server-03)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. If the TeamForge server has SELinux enabled, run it in 'permissive' mode temporarily while installing or upgrading TeamForge. TeamForge create runtime fails otherwise.
    1. Verify if SELinux is running in enforcing mode.
      • getenforce
    2. If the output of the getenforce command is either "Disabled" or "Permissive", SELinux is already disabled.
    3. If not disabled, run the following command to bring it to 'permissive' mode.
      • setenforce 0
  4. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8.xx-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.3 64 bit RPM package: CTF-Disconnected-media-17.8.655-104.rhel7.x86_64.rpm
        Note: In addition to the above CentOS 7.3 64 bit RPM package, you must get the following CentOS 7.3 compatibility RPM, which is required for TeamForge 17.8.xx disconnected media installation on CentOS 7.3 profile: compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm.
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm package if you are installing TeamForge 17.8 on CentOS 7.3.
      • rpm -ivh compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm
    4. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
      Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
      name=RHEL CDRom 			
      baseurl=file:///media/cdrom/Server/
      gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
      enabled=1
      gpgcheck=0
    6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  5. Install the TeamForge database packages.
    • yum install teamforge-database
  6. Set up your site's master configuration file.
    • vi /opt/collabnet/teamforge/etc/site-options.conf
    1. Configure the services and domain name tokens.
      server-03:SERVICES = ctfcore-database ctfcore-datamart
      my.app.host:SERVICES = ctfcore mail search codesearch etl binary binary-database reviewboard reviewboard-database
      my.scmandgit.domain.com:SERVICES = subversion cvs gerrit gerrit-database
    2. Attention: SSL is enabled by default and a self-signed certificate is auto-generated. Use the following tokens to adjust this behavior. To generate the SSL certificates, see Generate SSL certificates.
      Have the custom SSL certificate and private key for custom SSL certificate in place and provide their absolute paths in these tokens. SSL_CHAIN_FILE (intermediate certificate) is optional.
      SSL_CERT_FILE=
      SSL_KEY_FILE=
      SSL_CHAIN_FILE=
      Important: All SSL certificates including self-signed certificates are added automatically.
    3. Configure the database and datamart settings.
      Note: For more information about configuring variables, see site-options.conf
      DATABASE_TYPE=postgresql
      DATABASE_USERNAME=ctfuser
      DATABASE_NAME=ctfdb
      DATABASE_READ_ONLY_USER=ctfrouser
      REPORTS_DATABASE_USERNAME=ctfrptuser
      REPORTS_DATABASE_NAME=ctfrptdb
      REPORTS_DATABASE_READ_ONLY_USER=ctfrptrouser
      REPORTS_DATABASE_MAX_POOL_SIZE=30
      Note: The database name and username values are arbitrary alphanumeric strings.
    4. TeamForge 7.1 and later support automatic password creation. See AUTO_DATA for more information.
    5. If the token REQUIRE_PASSWORD_SECURITY is enabled, then set this PASSWORD_CONTROL_EFFECTIVE_DATE token with a future date. If already set, reset the PASSWORD_CONTROL_EFFECTIVE_DATE with a future date while upgrading to TeamForge 17.8.
      CAUTION:
      The Password Control Kit (PCK) disables, deletes or expires user accounts that don't meet the password security requirements starting from the date set for the PASSWORD_CONTROL_EFFECTIVE_DATE token. If a date is not set, the PCK disables, deletes or expires user accounts immediately. You must set (or reset if required) this token with a future date. For example, you can use the following logic and pick a future date: PASSWORD_CONTROL_EFFECTIVE_DATE=<the day on which TeamForge upgrade is done> + PASSWORD_WARNING_PERIOD. See PASSWORD_CONTROL_EFFECTIVE_DATE for more information.
    6. If the token REQUIRE_RANDOM_ADMIN_PASSWORD is already set to true, then set the token ADMIN_EMAIL with a valid email address. ADMIN_EMAIL=root@{__APPLICATION_HOST__}
    7. If you have LDAP set up for external authentication, you must set the “REQUIRE_USER_PASSWORD_CHANGE” site options token to false.
    8. Make sure the PostgreSQL tokens in the site-options.conf file are set as recommended in the following topic: What are the right PostgreSQL settings for my site?
    9. Configure TeamForge site options to proxy EventQ through TeamForge. For more information, see "EventQ and TeamForge on the same server" section in this topic: Proxying EventQ through TeamForge. Also see Ports used by TeamForge EventQ services.
    10. Save the site-options.conf file.
  7. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

Do this on the TeamForge Application Server (server-01)

  1. Copy the site-options.conf file from the Database Server to the TeamForge Application Server's /opt/collabnet/teamforge/etc/ directory.
  2. Set up your site's master configuration file.
    • vi /opt/collabnet/teamforge/etc/site-options.conf
    1. Configure the services and domain name tokens.
      my.app.host:SERVICES = ctfcore mail search codesearch etl
      my.app.host:PUBLIC_FQDN = my.app.domain.com
      server-03:SERVICES = ctfcore-database ctfcore-datamart
      my.scmandgit.domain.com:SERVICES = subversion cvs gerrit gerrit-database
    2. Add Binary identifiers if you are installing Nexus.
      my.app.host:SERVICES = ctfcore mail search codesearch 
      etl binary binary-database
    3. Add Review Board identifiers if you are installing Review Board.
      my.app.host:SERVICES = ctfcore mail search codesearch 
      etl binary binary-database reviewboard reviewboard-database
    4. Save the site-options.conf file.
  3. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

  4. Run the TeamForge post installation script. For more information, see post-install.py.
    Important: If the token REQUIRE_USER_PASSWORD_CHANGE is set to true, login to TeamForge user interface, change the admin password and then run the post-install.py script.
    • /opt/collabnet/teamforge/runtime/scripts/post-install.py
  5. Restart TeamForge.
    • teamforge restart

Do this on the SCM and Git Integration Server (server-03)

  1. Install Red Hat Enterprise Linux/CentOS 7.3 and log on as root.

    The host must be registered with the Red Hat Network if you are using Red Hat Enterprise Linux.

    See the Red Hat installation guide for help.

  2. Check your basic networking setup. See Set up Networking for more information.
  3. If the TeamForge server has SELinux enabled, run it in 'permissive' mode temporarily while installing or upgrading TeamForge. TeamForge create runtime fails otherwise.
    1. Verify if SELinux is running in enforcing mode.
      • getenforce
    2. If the output of the getenforce command is either "Disabled" or "Permissive", SELinux is already disabled.
    3. If not disabled, run the following command to bring it to 'permissive' mode.
      • setenforce 0
  4. Configure your TeamForge installation repository.
    • TeamForge installation repository configuration for sites with internet access
    1. Contact the CollabNet Support and download the TeamForge 17.8 installation repository package to /tmp.
    2. Install the repository package.
      • yum install -y /tmp/collabnet-teamforge-repo-17.8.xx-1.noarch.rpm
    3. Refresh your repository cache.
      • yum clean all
    • TeamForge installation repository configuration for sites without internet access
    1. Contact the CollabNet Support to get the auxiliary installer package for TeamForge 17.8 disconnected installation and save it in /tmp.
      • Red Hat Enterprise Linux/CentOS 7.3 64 bit RPM package: CTF-Disconnected-media-17.8.655-104.rhel7.x86_64.rpm
        Note: In addition to the above CentOS 7.3 64 bit RPM package, you must get the following CentOS 7.3 compatibility RPM, which is required for TeamForge 17.8.xx disconnected media installation on CentOS 7.3 profile: compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm.
    2. Unpack the disconnected installation package.
      • rpm -ivh <package-name>
    3. Unpack the compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm package if you are installing TeamForge 17.8 on CentOS 7.3.
      • rpm -ivh compat-ctf-dc-media-1.0-1.el7.centos.noarch.rpm
    4. Note: If the Red Hat Enterprise Linux/CentOS installation DVD is mounted already, skip the following instructions. If not, mount the DVD.
      Mount the Red Hat Enterprise Linux/CentOS installation DVD. The DVD contains the necessary software and utilities required for installing TeamForge without internet access.

      In the following commands, replace "cdrom" with the identifier for your server's CD/DVD drive, if necessary.

      • cd /media/
      • mkdir cdrom
      • mount /dev/cdrom ./cdrom/

      If there are any spaces in the automount, unmount it first and mount it as a filepath, with no spaces.

    5. Create a yum configuration file that points to the Red Hat Enterprise Linux/CentOS installation DVD.
      • vi /etc/yum.repos.d/cdrom.repo
      Here's a sample yum configuration file.
      [RHEL-CDROM] 
      name=RHEL CDRom 			
      baseurl=file:///media/cdrom/Server/
      gpgfile=file:///media/cdrom/RPM-GPG-KEY-redhat-release 
      enabled=1
      gpgcheck=0
    6. Verify your yum configuration files.
      • yum list httpd
      • yum list apr
  5. Install the TeamForge SCM and Git packages.
    • yum install teamforge-scm teamforge-git
  6. Copy the site-options.conf file from the Database Server to the SCM and Git Integration Server's /opt/collabnet/teamforge/etc/ directory.
  7. Configure the services and domain name tokens.
    my.scmandgit.domain.com:SERVICES = subversion cvs gerrit gerrit-database
    my.scmandgit.domain.com:PUBLIC_FQDN = my.scmandgit.domain.com
    my.app.host:SERVICES = ctfcore mail search codesearch etl binary binary-database reviewboard reviewboard-database
    server-03:SERVICES = ctfcore-database ctfcore-datamart
  8. Provision services.
    • teamforge provision
    Note:

    TeamForge 17.4 (and later) installer expects the system locale to be LANG=en_US.UTF-8. TeamForge "provision" command fails otherwise.

Do this on the EventQ server (server-02)

  1. Install EventQ. See EventQ installation walk-through

Do this on the TeamForge Application Server (server-01)

  1. Verify TeamForge installation.
    1. Reboot the server and make sure all services come up automatically at startup.
    2. Log on to the TeamForge web application using the default Admin credentials.
      • Username: "admin"
      • Password: "admin"
    3. Create a sample project. See Create a TeamForge project
    4. Write a welcome message to your site's users. See Create a site-wide broadcast.